Broward Cost Guide
What a garage floor coating costs in Broward County
The honest answer to garage floor coating cost in Broward County is a range with reasons — not a teaser number. The ranges below come from public Broward installer pricing pages and Florida cost guides researched in October 2026. Ranges vary by system, preparation, and moisture; your estimate is confirmed on site. We are a matching service, not an installer — these are not quotes from us.
Cost per square foot, by system
When installers talk about coating cost per square foot in Broward, this is the shape of the market right now:
| System | Typical per sq ft | Notes |
|---|---|---|
| Basic / solvent-based epoxy | ~$3–$5 | Entry system; thinner, less UV-stable |
| 100% solids epoxy | ~$5–$7 | Thicker build, common base coat |
| Epoxy + decorative flake + polyaspartic topcoat | ~$6–$12 | The most common Broward residential system |
| Full polyaspartic system | ~$6–$12 | Fast cure; often 1-day installs where offered |
| Metallic epoxy | ~$8–$12+ | Design-led, premium finish |
Totals by garage size
For flake systems with a polyaspartic topcoat, the per-square-foot ranges above applied to typical Broward garage sizes:
| Garage | Approx. size | Typical total |
|---|---|---|
| 1-car | ~200–300 sq ft | ~$1,200–$3,600 |
| 2-car | ~400–500 sq ft | $2,400–$6,000 |
| 3-car + | ~600–750 sq ft | ~$3,600–$9,000 |
Size totals are the per-sq-ft ranges above applied to typical sizes — arithmetic, not a quote. Run your own numbers in the cost calculator.
Epoxy vs polyaspartic, on price
Epoxy-led systems
A quote for an epoxy garage floor in Broward County usually lands between ~$3 and $7 per sq ft depending on whether it is a thin solvent-based coating or a 100% solids build — before flake and topcoat choices push a full system toward the $6–$12 band. Epoxy is the budget-friendlier base, with a slower cure and less UV resistance at the surface.
Polyaspartic-led systems
A quote for a polyaspartic garage floor in Broward typically runs ~$6–$12 per sq ft as a full system or topcoat. You are paying for speed (often next-day vehicle use where the system allows), UV stability in sun-exposed garages, and a harder-wearing surface — installed by a crew that can handle its fast set time.
What moves a Broward quote
Preparation
Diamond grinding or shot blasting so the coating bonds. Skipping proper prep is the cheapest way to quote — and the most common reason coatings peel.
Moisture
Testing typically runs a few hundred dollars where charged separately. If a slab needs moisture mitigation, guides put it around $1.50–$3.00 per sq ft on top. Broward's high water table makes this a real line item, not an upsell.
Water history & drainage
A garage that has taken on storm water may need grading or drainage addressed first. Coating a floor that floods again is money spent twice.
Removing a failed coating
Grinding off peeling paint, a failed DIY kit, or an old coating is a separate paid job before any new system goes down.
Cracks & damage
Crack and spall repair before coating adds labor and material. It is priced after inspection, not from a photo alone.
System & finish
Flake density, metallic pigments, topcoat type, and extra coats all change material cost.
DIY kit vs professional installation
A big-box DIY epoxy kit can cost a few hundred dollars in materials — and it is a different product: typically a thin, water- or solvent-based coating with minimal surface prep. Most DIY failures traced by installers come down to prep and moisture, not the kit itself. A professional job pays mostly for grinding equipment, moisture testing, thicker materials, and a crew that warranties its prep. Neither is “wrong” — know which one you are pricing. We compare the two pro routes in depth in the epoxy vs polyaspartic guide for Broward.
Broward cost questions
What is the average garage floor coating cost in Broward County?
There is no single average worth trusting, because system and preparation dominate. For the most common residential system — epoxy, decorative flake, and a polyaspartic topcoat — Broward homeowners typically see $6–$12 per sq ft installed, or roughly $2,400–$6,000 for a 2-car garage. Simpler epoxy systems cost less; metallic designs and wet slabs cost more.
Why do coastal quotes run higher than inland quotes?
Moisture, mostly. Older coastal slabs are more likely to read wet and need a mitigation primer, and garages with a water history need more prep. An inland new-build slab that tests dry is simply a cheaper floor to coat — the difference is the slab, not the ZIP code's prestige.
Is the cost per square foot the right way to compare quotes?
Only partly. Per-square-foot pricing is useful for planning, but small garages carry fixed costs (mobilization, grinding setup, edging) that push their per-foot price up, and stem walls, steps, and drains add labor that a flat rate hides. Compare what is included, not just the rate.
Does removing an old coating add a lot?
It adds real work. Grinding off peeling paint, a failed DIY kit, or an old coating is a separate paid job before any new system goes down, which is why removal-and-replacement projects cost more than coating bare concrete.